Menu
Your Cart

PoE Power Injector 56v 30w

PoE Power Injector 56v 30w
PoE Power Injector 56v 30w
PoE Power Injector 56v 30w
PoE Power Injector 56v 30w
PoE Power Injector 56v 30w
New
PoE Power Injector 56v 30w
PoE Power Injector 56v 30w
PoE Power Injector 56v 30w
PoE Power Injector 56v 30w
PoE Power Injector 56v 30w

Write a review

Note: HTML is not translated!
Bad Good
PoE Power Injector 56v 30w
Cambium Networks radios utilize PoE (Power over Ethernet) for delivering power and data. This PoE power supply has an AC input and a Data Input which then drives a 56V power plus data( PoE) output to the radio. This PoE power supply meets stringent Level VI efficiency requirements and carries regulatory compliance for deployment in most locations around the world. The unit is designed to be compact easy to deploy while delivering reliability and high performance. A POE injector, a device also commonly known as a “midspan,” introduces or injects power onto an Ethernet cable. The injector adds power to data that is coming from a non-PoE switch or “endspan.” It has an external power supply. 

How it's Works:
With PoE injectors, you send power and data through the Ethernet cable between the IP Camera and the injector. The data travels from the switch into the injector, which feeds it to the IP camera over 2 pairs of wires in the Ethernet cable. 

The primary purpose of a power injector is to allow a network admin to add a power supply to an ethernet cable. Power Injectors are brilliant if you want to make use of data cables that are already in place to power your devices, or are reluctant to install additional power sockets throughout your office or building

How to Connect:
The steps to connect your system using a PoE switch are as follows: Connect an Ethernet cable from the LAN port on the PoE switch to your router. Connect the power cable to the PoE switch and a power outlet or surge protector. Connect IP cameras to ports 1~8 on the PoE switch using the Ethernet extension cables.

Is it Safe or Not:
IEEE 802.3af/at/bt compliant PoE technology is safe. PoE injectors and switches will not damage any equipment, even if the equipment is not designed for PoE applications. ... It is this built-in feature of all IEEE 802.3af/at/bt-compliant devices that makes PoE technology inherently safe.
  • Stock: 10
  • Model: N000000L034A
  • Weight: 0.17g
  • Dimensions: 118.00mm x 43.70mm x 30.40mm
190 samples sold

Specification:

  • Data Interface: 1000 Base T; IEEE802.3 framing/coding; 100-ohm nominal impedance
  • Data Connectors: Two x RJ-45 (Data In; Data+Power Out)
  • AC Power Input Connection: 3-wire AC inlet; IEC320 C6
  • AC Power Input: 90 to 300 VAC; 47 to 63 Hz
  • DC Output voltage: 56 VDC +/- 5%
  • Efficiency: Energy Level 6
  • Hold-up Time: 10 ms at max load

    • Operating Temperature: 0° C to 40° C
      • Waterproofing: Indoor use only
      • Altitude: Up to 2km
      • Regulatory: ROHS / WEEE compliant
      • ESD: EN61000-4-2, Level 3
      • AC Line Surge: EN61000-4-5, Level 3
      • Safety: UL 60950-11, CuL, Aussie RCM, C-Tick and MEPS, CB, NOM, CE, LPS, Argentina, Singapore, Taiwan, Korea KC and MEPS, Brazil, China
      • Immunity: EN61000-4-2, level 3; EN61000-4-3, level 2; EN61000-4-5, level 3; EN61000-4-6, level 2; EN61000-4-11
    • Humidity: 20% to 90%
    ₹2,500.00